EIBACH ANTI-ROLL-KIT DODGE CHALLENGER/CHARGER/MAGNUM/300 2011-12

FOR THE ULTIMATE IN TUNABLE SUSPENSION PERFORMANCE PERFORMANCE, Complete your suspension upgrade with an Eibach ANTI-ROLL-KIT. While our PRO-KIT performance springs are regarded as the primary suspension enhancement components, the Eibach ANTI-ROLL-KIT allows critical fine-tuning of your Mustang’s handling characteristics. Our ANTI-ROLL-KITS reduce body roll through increased design stiffness over stock bars. The result: increased handling and cornering grip in any performance-driving situation. Manufactured from cold-formed, tubular high-strength aircraft-grade steel for precision performance, and finished with a long-lasting red powder coat finish, the ANTI-ROLL-KIT comes complete with all necessary mounting hardware and instructions for easy bolt-on installation. ANTI-ROLL-KIT Part# 2895.320 Performance Tuned Sway Bars for Improved Handling and Reduced Body-Roll Perfectly Balanced for Optimum Neutral-Steering Handling and Precise Turn-In Response Precision Engineered and Calibrated for PRO-KIT and SPORTLINE Performance Spring Kits Eibach Hi-Tensile Steel Alloy, Cold-Formed, Tempered and Shot-Peened for Long-Lasting Performance and Durability Greasable Urethane Bushings For Increased Responsiveness Precision Forged Ends and OEM Style Pressed Bushing Locaters (No Welding Or Weak Points Here) Million-Mile Warranty

FRONT: OE bar: 30 mm (1.2 in) solid OE measured bar rate: 136 N/mm (773 lbs/in) OE bar weight: 7.0 kg (15.4 lbs)

Eibach bar: 35mm (1.4 in) tubular and adjustable Eibach measured bar rate: 2 position adjustable P1 = 213 N/mm (1219 lbs/in) 58% increaseincrease P2 = 261 N/mm (1488 lbs/in) 92% increaseincrease Eibach bar weight: 5.9 kg (13 lbs) Bushings: New urethane bushings with grease grooves. End Link: OE

Approximate installation time: 1.0 hr

REAR: OE bar: 15 mm (0.6 in) solid OE measured bar rate: 4 N/mm (24 lbs/in) OE bar weight: 2.5 kg (5.5 lbs)

Eibach bar: 19mm (0.75 in) tubular and adjustable Eibach measured bar rate: 2 position adjustable P1 = 9.5 N/mm (54 lbs/in) 125% increaseincrease P2 = 11.2 N/mm (61 lbs/in) 154% increaseincrease Eibach bar weight: 3.2 kg (7 lbs) Bushings: New urethane bushings with grease grooves End Link: OE

Approximate installation time: 1.5 hr